Skip to content

For new builds, renovations & empty homes

Z-Leak

Automated precision air tightening

Built for Net Zero, Passive House and high-performance builds. The house is pressurized while a fine, non-toxic sealant mist is drawn into hidden gaps behind framing and drywall, sealing until your airtightness target is reached. This kind of automated sealing can reach below 1.0 ACH50; results depend on the building, and the official number comes from your program's verifier.

An unfinished basement with a sealant mist station spraying a fine mist, with sealed gaps along the wall seams, corner, floor joint and around a vent

Where it fits

New builds, empty homes, and a live leak-down you can watch

New builds & custom homes

Usually scheduled after the drywall is up and before final finishes. It hits tight airtightness targets without days of manual taping.

Renovations & empty homes

For homes that are empty, for example between closing and move-in. We mask finished surfaces and temporarily close openings such as vents, flues and fixtures first.

Live verification

Live pressure readings track the leakage drop on screen, and you get a before-and-after report to bring to your program's final airtightness test.

Pairs with hand sealing. Our crew hand-seals the big holes — rim joists, attic hatches, garage ceilings — and the automated system finishes the small hidden gaps hand sealing can't reach.

Installed by manufacturer-certified installation partners. Official certification comes from your program's verifier or tester, not from us. We don't certify projects or guarantee code compliance. Priced by quote.

Questions

Z-Leak FAQ

What areas do you serve?
Serving the GTA (Greater Toronto Area), within about 70 km of Newmarket, including York Region, Simcoe County, Durham Region and Toronto, and towns such as Newmarket, Aurora, Bradford, Richmond Hill, Markham, Vaughan, Stouffville, King City, Keswick, Uxbridge, Innisfil, Barrie, Alliston, Pickering, Ajax, Whitby and Oshawa. If you're near the edge, just ask.
Is it safe?
The sealant is non-toxic. The house must be empty of occupants during sealing, and we protect finished surfaces first.
What gets sealed off first?
We mask finished surfaces and temporarily close openings such as vents, flues and fixtures so the sealant only goes where it should.
When can trades return?
Once the mist has settled and we've unmasked, other trades can usually come back the same day. We'll confirm timing for your job.
Can it reach below 1.0 ACH50?
This kind of automated sealing can reach below 1.0 ACH50, which Net Zero and Passive House programs often require. Results depend on the building. The official airtightness number comes from your program's verifier, not from us.
Do you replace hand sealing?
No. The two work together. Our crew hand-seals the big holes, and the automated system finishes the small hidden gaps hand sealing can't reach.

Check if your project fits

Tell us about the build or the empty home and we'll talk through timing, access and a quote.